Cisco
Cisco UCS C210 M2 R2X0-PSU2-650W-SB 650W Hot-Plug Power
Cisco A9K-2KW-DC V02 2KW DC Power Supply ASR-9006-DC
Cisco PWR-C1-715WAC-P/2 715W AC 80+Platinum
Cisco PWR-C1-350WAC-P Power Supply 350w AC
Cisco C3KX-PWR-715WAC Catalyst 3K-X 715W AC Power Supply
CISCO IP PHONE CP-7942G Unified IP Phone
| Product Code | CP-7942G |
| Screen | 5-inch (12.5 cm), high-resolution (320 x 222), graphical monochrome 4-bit grayscale display. |
| Ethernet Switch | 10/100 |
| Codec Support | G.711a, G.711µ, G.729a, G.729ab, G.722, and iLBC audio compression codecs are supported. |
| Dimensions (H x W x D) | 8.2 x 10.5 x 6 in. (20.32 x 26.67 x 15.24 cm) |
| Weight | 3.5 lb (1.6 kg) |
| Package Weight | 5.2 lb (2.36 Kg) |
Cisco Catalyst C3KX-PWR-1100WAC/2 3560-X Power Supply
Power Capacity : 1100W AC
Designed For : Catalyst 3750X and 3560X Series switches.
Model Number : C3KX-PWR-1100WAC/2
Part Number : C3KX-PWR-1100WAC/2, C3KX-PWR-1100WAC/2=, C3KX-PWR-1100WAC/2-WS
Condition : 99% NEW
CISCO NM-1T3/E3 1 PORT T3/E3 Clear Channel Network Module
P/N : NM-1T3/E3
Prod : NM-1T3/E3=
BRAND : CISCO
CONDITION : NEW
1-Port T3/E3 Network Module
DS3/E3 Specifications
• DSX3 level interface with dual female 75-ohm BNC coaxial connectors per port (separate RX and TX)
• Full-duplex connectivity at DS3 rate (44.736 MHz)
• Full-duplex connectivity at E3 rate (34.368 MHz)
• Scrambling and subrate support of major DSU vendors
• Line build-out-Programmable for up to 450 feet of 734A or equivalent coaxial cable or up to 225 feet for 728A or equivalent coaxial cable
• C-bit, or M23 framing for T3, bypass and G.751 framing for E3 (software selectable)
• Binary 3-zero substitution (B3ZS) (T3) or high-density bipolar with three zeros (HDB3) (E3) line coding
• Support for 16- and 32-bit CRC (16-bit default)
• DS3 FEAC channel support
• Twenty-four-hour history maintained for error statistics and failure counts
• DS3 alarm and event detection (once per second polling)
• Alarm indication signal (AIS)
• Out of frame (OOF)
• Line code violation (LCV)
• Excessive zeros (EXZ)
• Far-end receive failure (FERF)
Cisco 3845 router Power Supply 300 Watt – PWR-3845-AC
Technical Specifications :
The technical specifications for the Cisco 341-0090-01 300 Watt
Input Voltage : 100-240 VAC, 50-60 Hz
Input Current : 6.5 – 3.5 A
Output Voltage : -48 VDC
Output Power : 300W
Efficiency : 80%
Temperature: Operating : 32°F to 104°F (0°C to 40°C)
Storage : -40°F to 158°F (-40°C to 70°C)
Humidity: Operating : 10% to 90% non-condensing
Storage : 5% to 95% non-condensing
Altitude: Operating : Up to 10,000 ft (3,048 m)
Storage : Up to 15,000 ft (4,572 m)
Dimensions (HxWxD) : 1.73 x 8.58 x 8.58 inches (44 x 218 x 218 mm)
Weight : 6.4 lb (2.9 kg)